2023 Case IH Tiger-Mate™ 255-Single Fold 28 ft. 8 in.(8.7 m)

2023 Case IH Tiger-Mate™ 255-Single Fold 28 ft. 8 in.(8.7 m)

Swipe to View More

  • Year 2023
  • Make Case IH
  • Model Tiger-Mate™ 255-Single Fold
2023 Case IH Tiger-Mate™ 255-Single Fold 28 ft. 8 in.(8.7 m)

2023 Case IH Tiger-Mate™ 255-Single Fold 28 ft. 8 in.(8.7 m)

2023 Case IH Tiger-Mate™ 255-Single Fold 28 ft. 8 in.(8.7 m)

Case IH field cultivators are designed from the ground up to create a high-efficiency seedbed. The Tiger-Mate® 255 offers the durability and Agronomic Design™ features you need for more efficient planting and maximum yield, while the Vibra-Tine™ 265 S-tine field cultivator takes on tough high-clay and timber soils in one spring pass.

Rethink Seedbed Productivity

The Tiger-Mate 255 field cultivator creates a high-efficiency seedbed for the most accurate seed placement. From crop residue management to soil tilth to seedbed conditions, we designed this field cultivator with an eye on improving agronomic performance.

For high-clay and timber fields, the Vibra-Tine 265 S-tine field cultivator helps you achieve optimal clod-sizing, a smooth field finish and healthier soil. Proven and effective S-tine technology is designed to maximize your yield potential in one spring pass.

Look to the Tiger-Mate® 255 for the durability and Agronomic Design™ features you need to create a high-efficiency seedbed for more efficient planting and maximum yield.

Features may include:

Superior Shank Assemblies

Create a better seedbed with the strong yet flexible shank assembly on the Tiger-Mate 255. For high-clay and timber soils, the Vibra-Tine 265 uses proven S-tine technology and rugged S-tine coils to effectively work your fields.

C-Shank
  • The Tiger-Mate 255 shank assembly helps to create a consistent, flat subsurface floor necessary for fast germination and even emergence.
  • The swept-back, high-concavity shank design helps soil explode higher, breaking tough clods and providing more consistent residue movement and better mixing.
  • Split-the-middle sweep pattern combined with a 6.5-inch shank spacing and 7.5-inch or 9-inch sweeps ensures 100 percent coverage for maximum crop residue mixing.
S-Tines
  • Vibrating technology on the Vibra-Tine 265 enables S-tines to break through heavy soil to create a better seedbed.
  • Large dimensions of the S-tine coils ensure powerful forward, backward and sideways motion of the tine.
  • Six ranks of S-tines with effective 4-inch spacing provides optimal clod sizing and allow for maximum residue flow.
Optimize Every Pass with AFS Soil Command™

In any condition, Case IH AFS Soil Command™ tillage technology adds site-specific precision to soil management. Maximize agronomic, economic and environmental performance with seedbed sensing and monitoring, total implement control, as-tilled mapping and the ability to create and execute soil management prescriptions

Monitor Agronomic Quality
  • Built on Agronomic Design™ principles, AFS Soil Command helps you fix seedbed issues before they become an issue for the planter.
  • Sensors mounted to select Tiger-Mate 255 shank assemblies alert the operator when the shanks begin to float, which results in an uneven seedbed floor.
  • Operators of any skill level can effectively monitor seedbed preparation and make adjustments on the AFS Pro 700, AFS Pro 1200 or competitive ISO 11783 compliant displays.
  • Green, yellow or red performance indicators are simple and easy to understand.
Create a High-Efficiency Seedbed
  • A smooth, level seedbed floor is critical for higher-efficiency planting and fast, uniform emergence.
  • Each time the field cultivator shank trips or floats, the sweep pivots and creates gouges in the seedbed floor that make the planter row unit bounce.
  • AFS Soil Command seedbed sensing and agronomic control technology enable you to monitor and adjust settings in real time to optimize the agronomic quality of the seedbed.

Engine

Engine Power Horsepower Requirements: 5-10 engine hp per foot or 2.5-5.5 engine hp per shank

Wheels & Tires

Tires, Rear Specification Mainframe Options: Standard: high-flotation 280/70R15 radial (Qty. 4) | Wing Options: Standard: high-flotation 280/70R15 radial (Qty. 4)
Wheels Stabilizer: All wing sections: standard non-pivoting 5.90×15 (4-ply tubeless) tire size

Operational

Operating Speed Recommended: operating speed is 5.5 – 10 mph. ACS harrows only, Field conditions must be evaluated before operating above 8 mph.

Hydraulics

Maximum Pressure 3,000 psi hydraulic welded cylinders, hoses and fittings

Chassis

Hitch/Type Drawbar Category: III | System: Constant-level T-hitch with easy adjust front turnbuckle; swinging hose stand with operators manual storage
Mainframe Bridge frame construction. Five ranks of 3×4 in. (76×102 mm) side-to-side and double 2×2 in. (51×51 mm) and 2×3 in. (51×76.2 mm)fore/aft structural members. Minimum rank spacing is 30 in. (762 mm) Total front to rear main bar is 131 in. (3 327 mm)

Lights and Safety

Lighting Transport: ASABE standard LED warning and taillights with 7-pin connector. SMV emblem and reflectors. ASAE highway transport chain

Dimensions

Dimensions Wing Size: 8 ft. (2.4 m) | Sweeps: Standard: 7.5 in. (190.5 mm) Maxxi-Grip knock-on
Width, Working Position 28 ft. 8 in. (8.7 m)
Width Main Frame: 11.5 ft. (3.5 m)
Transport Width (At Outer Shank / At Wing Tandems When Folded): 14 ft. 11 in. (4.5 m)
Transport Height 12 ft. 6 in. (3.8 m)
Length w/o Harrow: 23 ft. 1 in. (7 m) | Max. (w/Harrow): 28 ft. 10 in. (8.78 m)
Depth, Maximum Control System: working depth 6 in. (152.4 mm)

Weights

Weight 9,460 lb. (4291 kg)

Features

Features Number of Shanks: 53 | Depth Control System: Hydraulic single-point depth control | Leveling System: Turnbuckle adjustment (no tools required)
Shank Type Split-the-middle sweep pattern. 6.5 in. (165 mm) shank spacing. 11/16 in. ×1-3/4 in. (17.5 ×44.45 mm) shanks. Compression spring design with 180 lb. (68 kg) trip force and 14 in. (356 mm) trip height. Replaceable, double-hardened bushings used at shank pivot and spring slide area. Standard HD shank support channel
Hub Type and Spindles: Walking beam axles on both mainframe (greaseable) and wings (greaseless). Replaceable spindles on all walking beam axles

Product Photography